TL:DR Checklist

Arduino + Controller Setup 

 

 Install the Arduino IDE (if not already installed) 

 Download the SHADOW Arduino sketch and libraries ( link ) 

 Extract the folder 

 Install libraries from the Shadow folder to the Arduino Libraries folder 

 

 For Windows, this will be under Documents / Arduino / libraries by default 

 Copy these folders

 

 MP3Trigger   ( Sparkfun MP3 Trigger board ) 

 serMP3   ( MdFly MP3 board ) 

 USB_Host_Shield   

 

 

 

 

 Open the sketch in the IDE (  Shadow / Shadow.ino   ) 

 Set up the USB Shield ( see here ) 

 Connect your USB Shield and Arduino 

 Connect your Arduino to your computer using a USB-A to USB-B cable 

 Upload the sketch using the Arduino IDE

 

 Click on "Verify" 

 Click on "Upload" 

 

 

 Connect to the Arduino using the Serial Monitor

 

 Tools -> Serial Monitor 

 Select 115200 Baud 

 Check the output 

 

 

 Unplug the Arduino 

 Plug in the Bluetooth USB adapter 

 Plug the Arduino back into the Computer 

 Check the Serial Monitor 

 Unplug the Bluetooth Adapter 

 Plug the PS3 Move controller into the shield using a USB-A to USB-Mini cable

 

 Get the Bluetooth MAC address for the controller form the Monitor 

 

 

 With the controller unplugged, press the Playstation button to start pairing 

 Update the PS3MoveNavigatonPrimaryMAC variable in the Shadow sketch using the IDE with the MAC from the controller 

 Re-place the Bluetooth Adapter 

 Re-Upload the sketch after saving