Parts List

Shells ( Run Thread )
- Top
- Bottom
- Middle (optional)
Traxxas Bandit (Brushed 2WD) ( example )
Traxxas AC to DC Charger
- Note: The Traxxas Bandit may only come with a DC/cigarette lighter charger
- ( example )
Black E6000 ( example )
Foam Tires ( https://tmrcracing.com/star-wars-1/ )
- Front tires - 1 qty == 2 tires
- Rear tires - 1 qty == 2 tires
3D Printed wheel hub
- 3D Files - TraxxasBandit-Wheel-Hub.zip
- Install Instructions - Traxxas Bandit Wheels.pdf
Top Rack
- 3D Print ( thread )
Real PCB / IC side panels
- The real version requires a PCB, IC Sockets, IC chips, Capacitors and much more.
  - PCB Left and Right and 2 "daughter boards" ( Common vendor)
  - 83 x 14 Pin IC Sockets ( example )
  - 14 pin IC Chips ( example )
  - 16 x 16 Pin IC Sockets ( example )
  - 16 pin IC Chips ( example )
  - x 8mm Ceramic Circular Capacitors ( example )
Side Panel "Cooling Fins"
After-market ESC (less finicky) ( pending testing )
- ( HobbyWing Quicrun 1060 ESC )

PS3 Move Navigation Controller
- Main Thread
- Battery Replacement ( Thread | New Battery )
- Charging Station ( Example )
SHADOW Control Board ( Instruction Video ) ( Thread )
Arduino Uno R3 (common), Mega R3 (slightly more expensive), or Mega ADK (discontinued)
Arduino USB Host Shield
- SAVE YOURSELF BUY THIS ONE ( here )
- WARNING
  - a/o December 2023, all shields available on Amazon and AliExpress require replacing a chip on the board. Save yourself and by this one.
  - Most other shields will require soldering and repair ( see here )
Bluetooth 4.0 USB Adapter
- This must be an adapter that uses the older Bluetooth 4.0 spec.
- ( example )
USB-A to USB-B data cable ( Computer -> Arduino )
USB-A to Mini USB data cable ( PS3 Move -> Arduino )
Female - Female Dupont Wires
- The wiring in your car will be Black, Red, and White so at least have those colors. Since you will likely be wiring more than that (audio, etc.) it helps to have more than these three colors.
- ( Example )