Parts List

• Outer Shells ( RunLook Threadfor open sales )
  • Top
    
  • Bottom
  • Middle (optional)
• Traxxas Bandit (Brushed 2WD) ( example )
• Traxxas AC to DC Charger
  • Note: The Traxxas Bandit may only come with a DC/cigarette lighter charger
  • ( example )
• Black E6000 ( example )
• Foam Tires ( https://tmrcracing.com/star-wars-1/ )
  • Front tires - 1 qty == 2 tires
  • Rear tires - 1 qty == 2 tires
• 3D Printed wheel hub
  • 3D Files - TraxxasBandit-Wheel-Hub.zip
  • Install Instructions - Traxxas Bandit Wheels.pdf
    
• Top Rack
  • 3D Print ( thread )
• Real PCB / IC side panels

  • The real version requires a PCB, IC Sockets, IC chips, Capacitors and much more. 

    • PCB Left and Right and 2 "daughter boards" ( Common vendor)
    • 83 x 14 Pin IC Sockets ( example )
    • 14 pin IC Chips ( example )
    • 16 x 16 Pin IC Sockets ( example )
    • 16 pin IC Chips ( example )
    •  x 8mm Ceramic Circular Capacitors ( example )
      
• Side Panel "Cooling Fins"
  
• After-market ESC (less finicky) ( pending testing )
  • ( HobbyWing Quicrun 1060 ESC )
  tbd)

---

S.H.A.D.O.W ControllerControl System

This is an optional but common upgrade to replace the RC controller, the new controller is very easy to conceal when you are in costume or want to blend in to the crowd.

• PS3 Move Navigation Controller ( Example )
  • Main Thread
  • Battery Replacement ( Thread  | New Battery )
  • Charging Station ( Example )
• SHADOW Control Board ( Instruction Video ) ( Thread )
• Arduino Uno R3, (common),Arduino Mega R3 (slightly more expensive), (or Mega ADKADK, (discontinued)
• Arduino USB Host Shield (If not using a Mega ADK) 
  • SAVE YOURSELF BUY THIS ONE ( here )
  • WARNING
    • a/o December 2023, all shields available on Amazon and AliExpress require replacing a chip on the board. Save yourself and by this one.
    • Most other shields will require soldering and repair ( see here ) 
      
• Bluetooth 4.0 USB Adapter
  • This must be an adapter that uses the older Bluetooth 4.0 spec.
  • ( exampleExample )
• HobbyWing Quicrun 1060 ESC
  • ( Purchase )
• Deans (female) to Male T-connector (Traxxas) adapter
  • This is handy with the new ESC which comes with a Deans connector for the battery. I like no-fuss adapters for this build where they make sense.
  • ( Example )
• USB-A to USB-B data cable ( Computer -> Arduino )
• USB-A to Mini USB data cable ( PS3 Move -> Arduino )
• Female - Female Dupont Wires
  
  • The wiring in your car will be Black, Red, and White so at least have those colors. Since you will likely be wiring more than that (audio, etc.) it helps to have more than these three colors.
  • ( Example )

---

Optional Upgrades

• Hex Wheel Hub upgrade
• Aluminum side panel cooling fins

---

Useful

 Build Threads

• • TinyP