Parts List

• Shells ( Run Thread )
  • Top
  • Middle (optional)
  • Bottom
• Traxxas Bandit (2WD)
• Foam Tires ( https://tmrcracing.com/star-wars-1/ )
  • Front tires - 1 qty == 2 tires
  • Rear tires - 1 qty == 2 tires
• 3D Printed wheel hub
  • 3D Files - TraxxasBandit-Wheel-Hub.zip
  • Install Instructions - Traxxas Bandit Wheels.pdf
• AC to DC Charger (The Traxxas comes with a DC/cigarette lighter charger only)
• Top Rack
  • 3D Print ( thread )
• Side Panels
  • 3D Print ( thread ) ( needs link )
• Side Panel "Cooling Fins"

---

S.H.A.D.O.W Controller

• PS3 Move Navigation Controller
  • Main Thread
  • Battery Replacement ( Thread  | New Battery )
  • Charging Station ( Example )
• SHADOW Control Board ( Instruction Video ) ( Thread )
• Arduino Uno R3 (common), Mega R3 (slightly more expensive), or Mega ADK (discontinued)
• Arduino USB Host Shield  WARNING Most shields will require soldering and repair ( see here ) 
  • ( example 1 ) ( example 2 ) 
• Bluetooth 4.0 USB Adapter
  • This Must be an adapter that uses the older Bluetooth 4.0 spec. Anything lower or higher will likely not work
  • ( example )
• USB-A to USB-B data cable ( Computer -> Arduino )
• USB-A to Mini USB data cable ( PS3 Move -> Arduino )

---

Optional Upgrades

• Hex Wheel Hub upgrade
• Real PCB / IC side panels

  • The real version requires a PCB, IC Sockets, IC chips, Capacitors and much more. 

    • PCB Left and Right and 2 "daughter boards" ( Common vendor)
    • 83 x 14 Pin IC Sockets
    • 16 x 16 Pin IC Sockets
    •  x 8mm Ceramic Circular Capacitors
    • .. More to come
• Aluminum side panel cooling fins

---

Useful Build Threads

• • TinyP